Heavy Duty Wall
Hanger Set

"This Unique Heavy Duty Wall Hanger Replaces other hangers for Hollow Core Walls & Paneling"

EASY

• No tools Required!

• Anyone can install or remove in seconds

QUICK

• Mounts directly inot wall panel.

• No need to find a STUD!

SIMPLE

• Just pick your spot and insert by hand!

STRONG

• Heavy gauge metal & specially designed.

• Holds up to 150lbs or as much as the wall will support!

Questions:  Contact us

How to Install your Heavy
Duty Wall Hanger

1. Remember, no need to locate wall stud because this hanger works without studs - uses strength of wall panel to support weight! Simply mark spot on  wall where you want base of hook to be.  Then mark second spot approximately 1/4" above first spot.  This is point where hanger should be inserted. 

2. "Drill" chisel end of hanger into wall by twisting hanger back and forth with your hand.  Force chisel point into wall as you twist.  (On old-style plaster/lathe walls, pre-driling may be required.)

3. After chisel point passes through wall, twist hanger so hook end is upright.  Then push balance of hanger into wall until only hook is visible.  Hanger is now ready for use.

4.  To remove hanger, simply pull out of wall and fill small hole with putty or spackling compound.